info per caricabatterie Hymperion eos 610iduo

[ericla]

Salve , c'è qualcuno che mi può spiegare passo passo come impostare la scarica su Hymperion 610i e come devo impostare il CB per effettuare la carica con bilanciamento?
Esiste un manuale Italiano per questo CB?
E' da poco che uso la batterie Lipo e anche il CB l'ho acquistato da pochi giorni (sperando di aver fatto un buon acquisto) ,perciò scusatemi se pongo tante domande.
Grazie mille a tutti

[bimoto]

so di certo che l'Hyperion NON fa scarica.
Ciao

[francolvr]

Originalmente inviato da bimoto

so di certo che l'Hyperion NON fa scarica.
Ciao

Ma chi te l'ha detta una IDIOZIA simile?
Leggi scorrendo le righe in rosso!

Hyperion EOS 1210i Charger
User’s Manual for 1210I-A with A123 Mode
Warnings:
The EOS 1210i is a carefully-designed charger with many built-in
safety features, such as reverse polarity protection, input voltage
error warning, and cell-count mismatch warnings for lithium
chemistry batteries. HOWEVER, IT IS THE RESPOSIBILITY OF THE
USER TO INSURE THAT THE CHARGER IS CONFIGURED AND USED IN
A SAFE MANNER IN PROPER ENVIRONMENT. Note that as cell count
of lithium batteries becomes higher, all warning systems become less
accurate. As such, we strongly recommend the use of Hyperion
LBA10 balancers when charging lithium batteries, and especially so at
4S or higher. LBA provide much additional safety, because the LBA
· Always be sure that the charger is properly configured for

the correct battery type.

· Be sure that the batteries you charge are capable of charge

at the rate you select.

· Never charge batteries unattended.

· Charge only in a fire-resistant environment, such as on

concrete or brick, rather than wood surfaces.

· Do not charge near easily flammable materials.

· Do not charge batteries inside a model.

· Charging outdoors is recommended whenever practical

· Use only high-quality gold 4mm bullet connectors for charge

output cable connection to the charger. See “setup”.

·Insulate all Output connectors to eliminate the possibility of

short circuit. Damage caused by output short circuit is not

covered by warranty.

· Do not drop or cause other shock to the charger, nor subject

it to moisture or water

· Do not attempt to charge battery packs made from different

types of cells, a mixture of old and new cells, or cells made

with chemistry not supported by the EOS 1210i

· Do not attempt to charge “non-rechargeable” dry cells.

· Do not open the case of the charger under any

circumstances. Doing so will void the warranty.

· Keep the charger away from children or pets at all times.

In the event of injury of any kind, seek the attention of

medical professionals immediately.
Specifications:
· 2-Line, 16-Char, Blue Backlit LCD Data Display

· 10 User-def inable Memory Posit ions
· Charge/Discharge 1 to 12 cells Lithium Bat teries (3.7V/cell nominal types)

· Charge/Discharge 1 to 12 A123 Brand cells(3.3V/cell nominal types)

·Charge/Discharge/Cycle 1-30 cell NiCd/Ni-MH

· Charge/Discharge 2-12v Lead Acid Bat teries

· Balancer Safe - 55V max out on open circuit

· DataPort for Hyperion LBA10 Balancers

· 0.1A -10.0A Charge Current (180 Wat t Maximum)

·0.1A - 5.0A Discharge Current (50 Watt Maximum)

· TCS - Lithium Terminal Capacity Selection

50%~100%

· Rich Data Displays during and after charging and

discharging

· Input Cable with 4mm Connectors and Clamps

· Output Cable Set Included, with 4mm Connectors
· Integral, Thermostat-Controlled Cooling Fan

[vellodoro]

Io c'è l'ho e non ha la funzione di scarrica batteria.
Soltanto nella modalità storage può scarricare le batterie a 300 ma max attraverso il connettore del bilanciatore per portare al 50% della carrica le batterie lipo.

Ciao

[francolvr]

Originalmente inviato da bimoto

so di certo che l'Hyperion NON fa scarica.
Ciao

Leggere con attenzione.
Bimoto dice che Hyperion NON fa' scarica, non che il DUO non fa' scarica.
Hyperion e' la marca, il Duo e' un prodotto di quella marca, c'e una bella differenza.
Da qui il mio intervento.

[ElNonino]

Per completezza di informazione neanche l'EOS0610iNET possiede la funzione di scarica. (ne ho 2 aggiornati con il firmware 1.5).